Browser clip cutter · no install

Clip long videos into shorts, right in your browser

A browser alternative to the ClipShip desktop app: drop a long recording, mark the seconds that matter, crop them to 9:16, burn in your captions and download. The file is read on your device — no upload, no account, no install.

No file loaded —

MP4 · WebM · MOV — the file is read on your device and never uploaded.

Clip range 0:00.0 → 0:30.0
Aspect ratio
Crop position 50%
Captions 0

Rendering runs at 1× speed in this tab. Nothing is uploaded.

  • 0 uploadsthe file is read on your device, never sent
  • 9:16 · 1:1 · 4:5 · 16:9crop and reframe in one pass
  • SRT or typed captionsburned into the picture

The short version: drop a long recording in, mark the seconds that matter, crop them to 9:16 with your captions burned in, and download the file. The video is read by your browser — nothing is uploaded, there is no account, there is no queue.

Long video in, vertical short out

Most of a long recording is not worth posting. You already know which three minutes are good — you just do not want to open a full editor for them. This page is that shortcut: it plays the file, lets you mark a start and an end, frames that range in a 9:16 window (or 1:1, 4:5, 16:9), writes your captions on top of the picture, and records the result into a new file you can post.

It is built for talking-head video: podcasts, interviews, course lessons, livestream cut-downs, screen recordings with a voice over them. That is the footage people are turning into shorts all day.

How to cut a clip

  1. Load the file. MP4, WebM or MOV. The browser opens it from your disk, so a two-hour recording costs nothing in upload time — there is no upload.
  2. Set the range. Play or scrub the source, hit Set start where the clip should begin and Set end where it should stop. Aim for 15 to 60 seconds; that is where short-form platforms reward watching to the end.
  3. Pick the frame. 9:16 for Reels, Shorts and TikTok. 1:1 for square feed posts. 4:5 for the taller feed slot. 16:9 to keep the original wide frame. The crop slider moves the window left or right, so the person talking stays in shot instead of getting cut in half.
  4. Add captions. Paste an .srt you already have, or type lines as 0:03-0:07 your text, counted from the start of the clip, one caption per line. They are drawn into the picture, not layered on top by a player, so they survive a repost.
  5. Render and download. The tab re-records the range at 1× speed, so a 40-second clip takes about 40 seconds. The download button appears as soon as it is done.

What it does well, and what it does not do

It is good at the boring part: turning a wide recording into a vertical clip with no black bars, with captions you can actually read on a phone, in about a minute of work.

It is not an AI clipper. It does not listen to the audio to find the good moments, it does not transcribe speech into captions for you, and it does not track a face — you place the crop window yourself. If you want the software to make those choices, a desktop app is the right tool; what that app actually does — and where it stops — is the subject of the ClipShip review.

Why this runs in a browser

ClipShip's whole argument is that your footage should not be uploaded. That argument works for a desktop app and it works here: the browser can read a local file and draw it to a canvas without sending a byte anywhere, and it can record the result straight back to your disk. What you get is the same privacy promise without an installer, a minimum spec, or a machine that has to be Windows or an Apple Silicon Mac.

It also means it works where a desktop app cannot go: a Chromebook, a borrowed laptop, an iPad, a phone. When the only machine in front of you is a browser, this is the clip cutter you have.

Captions from work you have already done

Long videos almost always have subtitles somewhere already, and pasting one is faster than typing it: YouTube Studio, Otter, Descript and Rev all export .srt. Where to download the file and why its timings still line up with your clip is step 4 of the full workflow.

Sizes worth exporting

All four are rendered at 1080 pixels on the short side, which is what the platforms expect from a phone-shot or podcast-sourced clip. Nothing is upscaled beyond the source resolution, so a 720p original stays a 720p clip.

Privacy, in plain words

There is no sign-in, no storage bucket and no upload endpoint. The file you pick is read by the page, drawn on a canvas and recorded in the tab; the finished clip lives in a temporary blob until you download it. Reload the page and it is gone. The site counts page views like any website, but your footage and your captions never leave the device.

Who this is for

Podcasters who want three vertical cuts from every episode. Course creators turning one long lesson into ten shorts. Coaches and consultants who already have a talking-head video and no time to open Premiere. Social managers who need a clip right now, on whatever machine is in front of them. And anyone who tried a cloud clipper, saw the upload bar, and closed the tab.

If you want the background on the tool this page is an alternative to, read ClipShip vs this browser cutter. If you are deciding whether the desktop app is worth installing at all, start with its system requirements and what its AI actually does. If you want the whole workflow — from picking the moment to writing the hook — read how to turn a long video into short clips.

Before you cut

Is it free — any limits, watermarks or hidden fees?

It is free and there is no paid tier: no account, no daily quota, no watermark on the export. There is no size counter and no minute quota — the limit is your machine's memory, because the file is decoded inside the tab. A two-hour 1080p recording is fine on a desktop; on a phone, keep it short.

Is my video used to train an AI model?

No. No model ever sees the file: it is decoded and drawn inside your tab, and there is no upload step, so there is nothing to train on. The only thing this site counts is page views.

Do I need an account or a login?

No sign-up, no email, no login. Open the page, pick a file, and that is the whole start-up. There is no account to verify and nothing of yours is stored after you close the tab.

Can I use it on a phone, an iPad or a Chromebook?

Yes — that is the point of doing it in a tab. A Chromebook, an iPad, a locked-down work laptop or a phone all work with a current browser, none of which can run a Windows or Mac installer. Expect a slower export on a phone — a 30-second clip still takes about 30 seconds — and note that Chrome writes WebM while Safari on iOS writes MP4.

Is this a ClipShip replacement?

For the cutting, yes. ClipShip is a Windows and Mac desktop app that uses a local AI model to find the good moments for you. This page is the manual version in a browser tab: you mark the start and the end, crop to 9:16, add captions and export. No install, no account, nothing uploaded.

Does my video get uploaded anywhere?

No. The browser reads the file straight from your disk and draws the frames on a canvas on your device. There is no upload step and no account — the file never goes to a server.

Which browsers does it work in?

Chrome, Edge, Firefox and Safari on desktop, plus Chrome on Android and Safari on iOS. Export needs the browser's MediaRecorder: Chrome, Edge and Firefox produce WebM, Safari on macOS produces MP4. Long exports are slower on a phone.

Why does rendering take as long as the clip?

The clip is re-recorded frame by frame in the tab, at about 1× speed: a 30-second clip takes around 30 seconds. Keep the tab in front and let it finish before you switch away.

Can it pick the best moments for me?

No. Finding highlights means transcribing speech with a model that does not run reliably inside a browser tab. This tool is the fast manual path — scrub to the moment, set start and end, export. For automatic clip discovery you need a desktop app or a cloud service.

What file comes out?

WebM (VP9 or VP8 with Opus audio) in Chrome, Edge and Firefox, MP4 in Safari. YouTube, X and most editors take WebM. TikTok and Instagram prefer MP4, so if a platform rejects the file, convert it once with a free converter.

What is ClipShip's official website — is this it?

No. The official site for the ClipShip desktop app is clipship.co; clipship.pro is a separate product with a waiting list. This page is an independent browser tool and is not affiliated with either of them — we do not sell their app and we are not a mirror of their site. What we offer is the browser version of the same job, with nothing to install.

How do I use it, step by step?

Load a file, press Set start and Set end around the moment you want, pick 9:16 (or 1:1, 4:5, 16:9) and slide the crop so the person stays in frame, paste an .srt or type lines as 0:03-0:07 your text, then render and download. That is about a minute of clicking; the full walkthrough, with the five mistakes that waste the most time, is in the workflow guide on this site.

The export stopped, or the tab froze. What now?

Nine times out of ten it is tab throttling: keep the page in the foreground and do not switch to another app while it renders. If it still stalls, reload and try a shorter range or a smaller file, and close other heavy tabs — decoding happens in memory. Nothing is lost when it fails: the source file is still on your disk and never left the machine.

Is this the ClipShip clipping agency, or the ClipShip Editor?

No — three different things share this name. ClipShip is a desktop AI clipping app for Windows and Apple Silicon Macs; The Clip Ship is a clipping agency that edits short-form video for creators; ClipShip Editor is a separate browser editor published on GitHub. This page is an independent tool and is not affiliated with any of them: it cuts and captions a clip you already have, on your device.

Can I cut several clips from one long video?

Yes, one clip per render — the tab records a single range at a time. Set the range, render, download, then set the next range and render again. The source file stays loaded, so you only pick it once; five 30-second clips cost about two and a half minutes of rendering in total.

Does it transcribe the audio and write my captions?

No. There is no speech model in a browser tab — transcription needs a server or a desktop app with a model on disk. Bring the text instead: export an .srt from YouTube Studio, Otter, Descript or Rev and paste it, or type the lines yourself. The workflow guide shows where each of those files lives and why the timings still line up.

Can I add background music or change the volume?

No. The audio is passed through as it is in the source clip: one track, no mixing, no fades, no ducking. If the music matters, add it after export in CapCut or any editor — or pick a range where the audio is already clean.

Does the export lose quality, or can I choose the resolution?

The clip is drawn at up to 1080 pixels on the short side and never upscaled: a 720p source stays 720p, a 4K source comes out at 1080. There is no bitrate slider — the browser encodes with its own defaults (VP9 in Chrome and Edge, H.264 in Safari), which is fine for platforms that re-compress everything on upload anyway.